The customer machines bushings made from 17-4 stainless steel using a Miyano lathe with 150 PSI (10 Bar) through tool coolant.
Looking for performance improvements, the customer needed a multiple operation tool that could reduce the cycle time.
The EcoCut tooling successfully reduced the cycle time.
| Product: |
EcoCut |
| Objective: |
Decrease cycle time |
| Industry: |
Aerospace |
| Part: |
Bushings |
| Material: |
17-4 Stainless steel |
EcoCut multifunction tooling
| Measure |
Competitor |
EcoCut |
| Cycle Time |
1 min 2 sec |
55 sec |
| EcoCut offered 33.65% cost per hole savings over the competitor tooling. |