Produkte > Bohren > Bohr- und Senkhalter > GEN3SYS® XT > GEN3SYS XT Drill Chamfer - Overview
GEN3SYS® XT Drill and Chamfer   
GEN3SYS XT drill and chamfer holders consolidate two operations into one without sacrificing performance. With the increased penetration rates and tool life that this high penetration drilling product line is known for, you’ll experience lower cost per hole with this holder.
Vorteile
  • Drill and chamfer in a single operation.
  • Eliminate secondary operations like chamfering or deburring.
  • Increased penetration rates.
  • On the shelf standard—no lead time.
Merkmale
  • Design includes single gun drill.
  • Shorter body lengths ideal for more compact machines with a smaller envelope.
  • Available in four geometries: Standard (XT), Austenitic Stainless Steel (AS), Cast Iron (CI) and Low Rake (LR).
Empfohlene Materialien  
Materialien
x
Key Icon Steel
Material Key Icon High Temp Alloy
Key Icon Stainless Steel
Material Key Icon Hardened Steel
Key Icon Cast Iron
Material Key Icon Non-Ferrous
KeySymbolhinweis

Material Key Icon
Material Key Icon
Material Key Icon
Material Key Icon



Empfohlene Branchen  
Branchen
x
Key Icon Medical
Industry Key Icon Renewable Energy/ Energy
Key Icon Automotive
Industry Key Icon Aerospace
Key Icon Firearms
Industry Key Icon Agriculture
Key Icon Oil and Gas
Industry Key Icon Marine
Key Icon General Production
Industry Key Icon Heavy Equipment
Key Icon Hydraulics
Industry Key Icon Tool, Mold, and Die
Key Icon Structural Steel Fabricator
Key Symbolhinweis
Industry
Industry
Industry
Industry
Industry
Industry
Industry
Industry



Technische Informationen

Produktspezifikationen
Durchmesserbereich
0.4311" - 1.3780" (11.00 mm - 35.00 mm)
Einsatzmaterial
Hartmetall K35 (C1) und K20 (C2)
Beschichtung
AM300®
Nutoptionen
Gerade
Schaftoptionen
Geflanscht (mit und ohne Spannfläche)
Kühlmittel
Innere Kühlschmierstoffzufuhr

Produktbezeichnung
GEN3SYS XT Halter (Schaft-Durchmesser)
Halter
x
6 = XT-Halter
6
Länge
x
01 = Extra-kurze Länge
01
Serie
x
11 = Serie 11
12 = Serie 12
13 = Serie 13
14 = Serie 14
15 = Serie 15
16 = Serie 16
17 = Serie 17
18 = Serie 18
20 = Serie 20
22 = Serie 22
24 = Serie 24
26 = Serie 26 
29 = Serie 29
32 = Serie 32
18
Nut
x
C45 = Bohr- und Senkhalter
C45
-
Schaft-Durchmesser
x
Zoll (Inch)
063 = 5/8"
075 = 3/4"
100 = 1"
125 = 1-1/4"
150 = 1-1/2"
Metrisch (mm)
16 = 16 mm
20 = 20 mm
25 = 25 mm
32 = 32 mm
40 = 40 mm
100
Schaft-Typ
x
F = Geflanscht mit Fläche
FM = Geflanscht metrisch mit Fläche
C = Zylindrisch (ohne Fläche)
CM = Zylindrisch metrisch (ohne Fläche)
F
Hochleistungsbohren
Literature Thumbnail

Nur online verfügbar

Schnittwertempfehlungen
GEN3SYS® XT